Dynaliner 1/8"

The ALL NEW Dynaliner is the perfect ultra light weight insulator to use on top of Dynamat. This durable crush and tear resistant material has the highest heat blocking properties available in a single layer synthetic foam-type material.

Dynaliner isn’t affected by oil and does not absorb water. Dynaliner provides acoustic isolation and excellent thermal insulation for roof, firewall, floor, quarter panels, doors and even as a hoodliner.

1/8 " thickness

Contents: (1) 32"x 54" x 1/8" (813mm x 1372mm x 3.175mm) Dynaliner Sheet

Total Coverage: 12 ft² (1.11 m²)

Dynaliner 1/4"

The ALL NEW Dynaliner is the perfect ultra light weight insulator to use on top of Dynamat. This durable crush and tear resistant material has the highest heat blocking properties available in a single layer synthetic foam-type material.

Dynaliner isn’t affected by oil and does not absorb water. Dynaliner provides acoustic isolation and excellent thermal insulation for roof, firewall, floor, quarter panels, doors and even as a hoodliner.

1/4 " thickness

Contents: (1) 32"x 54" x 1/4" (813mm x 1372mm x 6.35mm) Dynaliner Sheet

Total Coverage: 12 ft² (1.11 m²)

Dynaliner 1/4"

The ALL NEW Dynaliner is the perfect ultra light weight insulator to use on top of Dynamat. This durable crush and tear resistant material has the highest heat blocking properties available in a single layer synthetic foam-type material.

Dynaliner isn’t affected by oil and does not absorb water. Dynaliner provides acoustic isolation and excellent thermal insulation for roof, firewall, floor, quarter panels, doors and even as a hoodliner.

1/2 " thickness

Contents: (1) 32"x 54" x 1/2" (813mm x 1372mm x 12.7mm) Dynaliner Sheet

Total Coverage: 12 ft² (1.11 m²)

DynaPad Automotive Roll

DynaPad is a four-layer composite barrier that provides excellent acoustic attenuation and thermal insulation. This heavier material utilizes "Dissimilar Layer Insulating" technology that solves two of the most difficult automotive problems - exhaust system heat and low frequency noise. DynaPad is used primarily on the floor.

Contains: 32 in. x 54 in. long roll 3/8 inch thick four-part composite with 1lb per square foot barrier material (12 square feet total)

Dynamat Hoodliner

Get better sound, protect your car's paint finish and get that show car look with a custom thermo-acoustic Dynamat Hoodliner. The Hoodliner's "Sound Soaker" foam absorbs engine noise, delivering a quieter listening environment in your vehicle. In addition, the Hoodliner's 1 mil. reinforced aluminized skin creates a water/oil barrier that reflects up to 97% of radiant heat to protect the hood's paint finish.

NOTE: The Hoodliner provides maximum noise control when applied over Dynamat Xtreme.

Contents: (1) 32" x 54" x 0.75" (813mm x 1372mm x 19mm) piece of Hoodliner

Application: Use under hood.

DynaTape

DynaTape is a 1-1/2" wide x 30 foot long, 2 mil aluminum finishing tape. DynaTape can be used with Dynamat to seal seams, contain unwanted butyl migration and give your project a complete and professional appearance. DynaTapes transparent, pressure sensitive acrylic, peel and stick adhesive makes finishing your project a simple process, providing you with a cool, quiet and comfortable ride.

Dynaplate

Dynaplate is an exotic constrained layer damping material that structurally reinforces car body panels for maximum Sound Pressure Level (SPL). This damping material was specifically engineered for the SPL rules and power classes of dB Dragracing, USACi, IASCA and IdBL. Using a setup of only two layers yields non-flexible panels that prevent the ballooning effect common in SPL vehicles. This Dynaplate setup also reduces vibration better than any other product on the market. What you get is the most bass possible without modifying the appearance of your vehicle’s interior.

Dynaplate is the only damping material specifically designed for SPL competitions. Used in a multiple layer setup, Dynaplate flexes less than standard car sheet metal. At only one quarter the weight, one layer of Dynaplate damps 50% better than Dynamat Original. Two layers produce damping comparable to Dynamat Xtreme and weigh less. Dynaplate is designed for maximum SPL. For sound quality applications use Dynamat Xtreme or a combination of Dynamat Xtreme and Dynaplate.

Contents: Three 24" x 30" pieces of Dynaplate for floors, roofs, doors, woofer enclosure faces, and anywhere desired to structurally reinforce your vehicle's body panels.

dynaspray jug 10 liters

Want an easy solution for sound deadening and thermal insulation in those hard to reach areas? DynaSpray is a water-based, ceramic coating that can be sprayed as an interior treatment, undercoating or used under the hood. It can be left as natural flat black or finish painted. This multi-purpose liquid is very durable and contains rust inhibitors for long lasting protection. Available in 2.5 gallon jug. For professional results, use the DynaSpray spray gun.

Coverage: 54.00 to 70.00 ft2 (5.00 to 6.50 m2)

Recommended Thickness: 0.070" (1.78 mm)

Content volume: 2.5 gallons (10 liters)

DynaDeck 3 Feet

Dynamic Control DynaDeck is a waterproof, 3-part composite carpet replacement combining the high thermal insulation capabilities of Dynaliner with the low-frequency exhaust noise rejection of DynaPad. The top layer is a durable, deep-twist, embossed vinyl grain that matches the textured floor pattern of vintage cars. DynaDeck does not absorb water and is ideal for use in street rods, Jeeps, convertibles, and vintage sports cars where durable, waterproof floor material is desired. For optimal results, install DynaDeck over Dynamat.

DynaDeck 6 Feet

Dynamic Control DynaDeck is a waterproof, 3-part composite carpet replacement combining the high thermal insulation capabilities of Dynaliner with the low-frequency exhaust noise rejection of DynaPad. The top layer is a durable, deep-twist, embossed vinyl grain that matches the textured floor pattern of vintage cars. DynaDeck does not absorb water and is ideal for use in street rods, Jeeps, convertibles, and vintage sports cars where durable, waterproof floor material is desired. For optimal results, install DynaDeck over Dynamat.

DynaDeck 9 Feet

Dynamic Control DynaDeck is a waterproof, 3-part composite carpet replacement combining the high thermal insulation capabilities of Dynaliner with the low-frequency exhaust noise rejection of DynaPad. The top layer is a durable, deep-twist, embossed vinyl grain that matches the textured floor pattern of vintage cars. DynaDeck does not absorb water and is ideal for use in street rods, Jeeps, convertibles, and vintage sports cars where durable, waterproof floor material is desired. For optimal results, install DynaDeck over Dynamat.

DynaDeck 12 Feet

Dynamic Control DynaDeck is a waterproof, 3-part composite carpet replacement combining the high thermal insulation capabilities of Dynaliner with the low-frequency exhaust noise rejection of DynaPad. The top layer is a durable, deep-twist, embossed vinyl grain that matches the textured floor pattern of vintage cars. DynaDeck does not absorb water and is ideal for use in street rods, Jeeps, convertibles, and vintage sports cars where durable, waterproof floor material is desired. For optimal results, install DynaDeck over Dynamat.

DynaDeck 25 Feet

Dynamic Control DynaDeck is a waterproof, 3-part composite carpet replacement combining the high thermal insulation capabilities of Dynaliner with the low-frequency exhaust noise rejection of DynaPad. The top layer is a durable, deep-twist, embossed vinyl grain that matches the textured floor pattern of vintage cars. DynaDeck does not absorb water and is ideal for use in street rods, Jeeps, convertibles, and vintage sports cars where durable, waterproof floor material is desired. For optimal results, install DynaDeck over Dynamat.